1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538 | [ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-generic (buildd@king) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Aug 20 17:53:40 UTC 2008 (Ubuntu 2.6.24-19.41-generic)
[ 0.000000] Command line: root=UUID=a7985c0f-8c5b-4373-8752-2b3e1a894bc0 ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff60000 (usable)
[ 0.000000] BIOS-e820: 00000000bff60000 - 00000000bff6e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bff6e000 - 00000000bff6f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bff6f000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 786272) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F8590 checksum 0
[ 0.000000] ACPI: RSDP 000F8590, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT BFF64304, 006C (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
[ 0.000000] ACPI: FACP BFF6D8E8, 00F4 (r3 NVIDIA MCP65-E 6040000 PTL_ F4240)
[ 0.000000] ACPI: DSDT BFF64370, 9504 (r1 NVIDIA MCP65 6040000 MSFT 3000000)
[ 0.000000] ACPI: FACS BFF6EFC0, 0040
[ 0.000000] ACPI: SRAT BFF6D9DC, 00A0 (r1 AMD HAMMER 6040000 AMD 1)
[ 0.000000] ACPI: WDAT BFF6DA7C, 0104 (r1 PTLTD WDATTBL 6040000 LTP 1)
[ 0.000000] ACPI: SSDT BFF6DB80, 0206 (r1 PTLTD POWERNOW 6040000 LTP 1)
[ 0.000000] ACPI: MCFG BFF6DD86, 003C (r1 HP MCFG 6040000 LTP 0)
[ 0.000000] ACPI: HPET BFF6DDC2, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
[ 0.000000] ACPI: APIC BFF6DDFA, 0068 (r1 HP APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT BFF6DE62, 0028 (r1 HP $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SLIC BFF6DE8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1)
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] SRAT: Node 0 PXM 0 0-c0000000
[ 0.000000] Entering add_active_range(0, 0, 157) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 786272) 1 entries of 3200 used
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-00000000bff60000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 157
[ 0.000000] 0: 256 -> 786272
[ 0.000000] On node 0 totalpages: 786173
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1222 pages reserved
[ 0.000000] DMA zone: 2719 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10693 pages used for memmap
[ 0.000000] DMA32 zone: 771483 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
[ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 774202
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=UUID=a7985c0f-8c5b-4373-8752-2b3e1a894bc0 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] hpet clockevent registered
[ 0.000000] TSC calibrated against HPET
[ 358.460340] Marking TSC unstable due to TSCs unsynchronized
[ 358.460342] time.c: Detected 2009.110 MHz processor.
[ 358.462951] Console: colour VGA+ 80x25
[ 358.462954] console [tty0] enabled
[ 358.462971] Checking aperture...
[ 358.462974] CPU 0: aperture @ c0000000 size 32 MB
[ 358.462975] Aperture too small (32 MB)
[ 358.469111] No AGP bridge found
[ 358.506109] Memory: 3089000k/3145088k available (2489k kernel code, 55692k reserved, 1318k data, 320k init)
[ 358.506143] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 358.582162] Calibrating delay using timer specific routine.. 4022.22 BogoMIPS (lpj=8044443)
[ 358.582198] Security Framework initialized
[ 358.582203] SELinux: Disabled at boot.
[ 358.582216] AppArmor: AppArmor initialized
[ 358.582219] Failure registering capabilities with primary security module.
[ 358.582558] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 358.585987] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 358.587610] Mount-cache hash table entries: 256
[ 358.587745] Initializing cgroup subsys ns
[ 358.587748] Initializing cgroup subsys cpuacct
[ 358.587761] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 358.587763] CPU: L2 Cache: 512K (64 bytes/line)
[ 358.587766] CPU 0/0 -> Node 0
[ 358.587767] CPU: Physical Processor ID: 0
[ 358.587769] CPU: Processor Core ID: 0
[ 358.587792] SMP alternatives: switching to UP code
[ 358.588379] Early unpacking initramfs... done
[ 358.905623] ACPI: Core revision 20070126
[ 358.905709] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 359.153326] Using local APIC timer interrupts.
[ 359.203040] APIC timer calibration result 12556933
[ 359.203042] Detected 12.556 MHz APIC timer.
[ 359.203142] SMP alternatives: switching to SMP code
[ 359.203619] Booting processor 1/2 APIC 0x1
[ 359.196995] Initializing CPU#1
[ 359.274227] Calibrating delay using timer specific routine.. 4018.23 BogoMIPS (lpj=8036467)
[ 359.274233] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 359.274235] CPU: L2 Cache: 512K (64 bytes/line)
[ 359.274237] CPU 1/1 -> Node 0
[ 359.274239] CPU: Physical Processor ID: 0
[ 359.274240] CPU: Processor Core ID: 1
[ 359.274340] AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
[ 359.274354] AMD C1E detected late. Force timer broadcast.
[ 359.291127] Brought up 2 CPUs
[ 359.291237] CPU0 attaching sched-domain:
[ 359.291239] domain 0: span 03
[ 359.291241] groups: 01 02
[ 359.291244] domain 1: span 03
[ 359.291245] groups: 03
[ 359.291248] CPU1 attaching sched-domain:
[ 359.291249] domain 0: span 03
[ 359.291250] groups: 02 01
[ 359.291253] domain 1: span 03
[ 359.291254] groups: 03
[ 359.291483] net_namespace: 120 bytes
[ 359.291897] Time: 12:38:53 Date: 08/27/08
[ 359.291931] NET: Registered protocol family 16
[ 359.292126] ACPI: bus type pci registered
[ 359.292196] PCI: Using configuration type 1
[ 359.293355] ACPI: EC: Look up EC in DSDT
[ 359.295064] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 359.295633] ACPI: Interpreter enabled
[ 359.295635] ACPI: (supports S0 S3 S4 S5)
[ 359.295650] ACPI: Using IOAPIC for interrupt routing
[ 359.279437] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 359.302552] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[ 359.302555] ACPI: EC: driver started in interrupt mode
[ 359.302620] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 359.303512] PCI: Transparent bridge - 0000:00:08.0
[ 359.303865] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 359.303936] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 359.303965] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
[ 359.303997] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[ 359.304028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[ 359.304059] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR3._PRT]
[ 359.325565] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *15
[ 359.325761] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *10
[ 359.325949] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled.
[ 359.326136] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
[ 359.326324] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *11
[ 359.326511] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
[ 359.326700] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
[ 359.326887] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *15
[ 359.327089] ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
[ 359.327275] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11
[ 359.327462] ACPI: PCI Interrupt Link [LUS2] (IRQs 17) *7
[ 359.327649] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10
[ 359.327835] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *11
[ 359.328022] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled.
[ 359.328209] ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5
[ 359.328395] ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *0, disabled.
[ 359.328534] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 359.328563] pnp: PnP ACPI init
[ 359.328571] ACPI: bus type pnp registered
[ 359.312986] ACPI Error (dsopcode-0548): Field [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) [20070126]
[ 359.312992] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.PMIO._CRS] (Node ffff8100bce36960), AE_AML_BUFFER_LIMIT
[ 359.313031] ACPI Error (uteval-0233): Method execution failed [\_SB_.PCI0.LPC0.PMIO._CRS] (Node ffff8100bce36960), AE_AML_BUFFER_LIMIT
[ 359.313037] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[ 359.314736] pnp: PnP ACPI: found 11 devices
[ 359.314738] ACPI: ACPI bus type pnp unregistered
[ 359.315007] PCI: Using ACPI for IRQ routing
[ 359.315009] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 359.330312] NET: Registered protocol family 8
[ 359.330313] NET: Registered protocol family 20
[ 359.330408] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 359.330411] hpet0: 3 32-bit timers, 25000000 Hz
[ 359.331464] AppArmor: AppArmor Filesystem Enabled
[ 359.351006] Time: hpet clocksource has been installed.
[ 359.351010] Clockevents: could not switch to one-shot mode: lapic is not functional.
[ 359.351012] Could not switch to high resolution mode on CPU 0
[ 359.338291] Clockevents: could not switch to one-shot mode: lapic is not functional.
[ 359.338294] Could not switch to high resolution mode on CPU 1
[ 359.346319] system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
[ 359.346324] system 00:03: ioport range 0x360-0x361 has been reserved
[ 359.346327] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 359.346335] system 00:0a: iomem range 0xffc00000-0xffffffff could not be reserved
[ 359.346337] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 359.346340] system 00:0a: iomem range 0xfed00000-0xfed00fff has been reserved
[ 359.346342] system 00:0a: iomem range 0xfec80000-0xfec80fff has been reserved
[ 359.346345] system 00:0a: iomem range 0xfef00000-0xfef00fff has been reserved
[ 359.346757] PCI: Bridge: 0000:00:08.0
[ 359.346759] IO window: disabled.
[ 359.346761] MEM window: f2100000-f21fffff
[ 359.346764] PREFETCH window: disabled.
[ 359.346766] PCI: Bridge: 0000:00:0b.0
[ 359.346767] IO window: disabled.
[ 359.346769] MEM window: disabled.
[ 359.346771] PREFETCH window: disabled.
[ 359.346773] PCI: Bridge: 0000:00:0c.0
[ 359.346774] IO window: disabled.
[ 359.346776] MEM window: f2000000-f20fffff
[ 359.346778] PREFETCH window: disabled.
[ 359.346782] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:05:00.0
[ 359.346784] PCI: Bridge: 0000:00:0d.0
[ 359.346785] IO window: 4000-4fff
[ 359.346787] MEM window: cc000000-ceffffff
[ 359.346789] PREFETCH window: d0000000-dfffffff
[ 359.346792] PCI: Bridge: 0000:00:0e.0
[ 359.346793] IO window: 5000-5fff
[ 359.346795] MEM window: f0000000-f1ffffff
[ 359.346797] PREFETCH window: f2600000-f27fffff
[ 359.346806] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 359.346815] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 359.346822] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 359.346828] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 359.346834] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 359.346884] NET: Registered protocol family 2
[ 359.390371] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 359.391968] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 359.398572] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 359.399376] TCP: Hash tables configured (established 524288 bind 65536)
[ 359.399379] TCP reno registered
[ 359.414317] checking if image is initramfs... it is
[ 360.012900] Freeing initrd memory: 7558k freed
[ 360.018255] Simple Boot Flag at 0x36 set to 0x1
[ 360.035768] audit: initializing netlink socket (disabled)
[ 360.035780] audit(1219840733.332:1): initialized
[ 360.037743] VFS: Disk quotas dquot_6.5.1
[ 360.037818] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 360.037941] io scheduler noop registered
[ 360.037944] io scheduler anticipatory registered
[ 360.037946] io scheduler deadline registered
[ 360.038064] io scheduler cfq registered (default)
[ 360.038094] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 360.039041] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 360.039058] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 360.039091] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 360.039104] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 360.039118] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 360.039131] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 360.039162] Boot video device is 0000:05:00.0
[ 360.039320] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 360.039341] assign_interrupt_mode Found MSI capability
[ 360.039360] Allocate Port Service[0000:00:0b.0:pcie00]
[ 360.039418] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 360.039439] assign_interrupt_mode Found MSI capability
[ 360.039453] Allocate Port Service[0000:00:0c.0:pcie00]
[ 360.039507] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 360.039527] assign_interrupt_mode Found MSI capability
[ 360.039541] Allocate Port Service[0000:00:0d.0:pcie00]
[ 360.039595] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 360.039615] assign_interrupt_mode Found MSI capability
[ 360.039630] Allocate Port Service[0000:00:0e.0:pcie00]
[ 360.066418] Real Time Clock Driver v1.12ac
[ 360.066611] hpet_resources: 0xfed00000 is busy
[ 360.066649] Linux agpgart interface v0.102
[ 360.066651] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 360.067668] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 360.067730] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 360.067819] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 360.093358] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 360.093364] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 360.102031] mice: PS/2 mouse device common for all mice
[ 360.102066] cpuidle: using governor ladder
[ 360.102068] cpuidle: using governor menu
[ 360.102215] NET: Registered protocol family 1
[ 360.102315] registered taskstats version 1
[ 360.102456] Magic number: 4:893:633
[ 360.102511] hash matches device ptycc
[ 360.102595] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 360.102598] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 360.102600] EDD information not available.
[ 360.102608] Freeing unused kernel memory: 320k freed
[ 360.121015] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 361.297078] fuse init (API version 7.9)
[ 361.332735] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 361.332741] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 361.316134] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 361.316141] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 361.317483] ACPI Exception (thermal-0339): AE_BAD_DATA, No critical threshold [20070126]
[ 361.783808] usbcore: registered new interface driver usbfs
[ 361.783832] usbcore: registered new interface driver hub
[ 361.807975] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 361.808333] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 361.808346] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LMAC] -> GSI 20 (level, low) -> IRQ 20
[ 361.808352] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 361.809162] usbcore: registered new device driver usb
[ 361.819859] SCSI subsystem initialized
[ 361.923573] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 361.924879] libata version 3.00 loaded.
[ 362.327664] forcedeth 0000:00:06.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1e:68:66:b1:be
[ 362.327669] forcedeth 0000:00:06.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 362.328170] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18
[ 362.328181] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 18 (level, low) -> IRQ 18
[ 362.328404] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 362.328411] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 362.328682] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 362.328703] ohci_hcd 0000:00:02.0: irq 18, io mem 0xf2486000
[ 362.385020] usb usb1: configuration #1 chosen from 1 choice
[ 362.385043] hub 1-0:1.0: USB hub found
[ 362.385051] hub 1-0:1.0: 10 ports detected
[ 362.487369] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 17
[ 362.487382] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 17 (level, low) -> IRQ 17
[ 362.487575] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 362.487581] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 362.487643] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 362.487676] ehci_hcd 0000:00:02.1: debug port 1
[ 362.487680] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 362.487691] ehci_hcd 0000:00:02.1: irq 17, io mem 0xf2488000
[ 362.498735] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 362.498851] usb usb2: configuration #1 chosen from 1 choice
[ 362.498875] hub 2-0:1.0: USB hub found
[ 362.498882] hub 2-0:1.0: 10 ports detected
[ 362.602829] PCI: Enabling device 0000:07:05.0 (0100 -> 0102)
[ 362.603167] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
[ 362.603177] ACPI: PCI Interrupt 0000:07:05.0[A] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5
[ 362.655291] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[f2100000-f21007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 362.669282] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 362.669637] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23
[ 362.669647] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LTID] -> GSI 23 (level, low) -> IRQ 23
[ 362.669664] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 362.669671] ACPI: PCI interrupt for device 0000:00:0a.0 disabled
[ 362.672234] ahci 0000:00:0a.0: version 3.0
[ 362.672247] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LTID] -> GSI 23 (level, low) -> IRQ 23
[ 363.184983] usb 2-4: new high speed USB device using ehci_hcd and address 2
[ 363.420324] usb 2-4: configuration #1 chosen from 1 choice
[ 363.673034] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 363.673040] ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led clo pmp pio
[ 363.673044] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 363.673432] scsi0 : ahci
[ 363.673486] scsi1 : ahci
[ 363.673523] scsi2 : ahci
[ 363.673559] scsi3 : ahci
[ 363.673640] ata1: SATA max UDMA/133 abar m8192@0xf2484000 port 0xf2484100 irq 23
[ 363.673643] ata2: SATA max UDMA/133 abar m8192@0xf2484000 port 0xf2484180 irq 23
[ 363.673646] ata3: SATA max UDMA/133 abar m8192@0xf2484000 port 0xf2484200 irq 23
[ 363.673648] ata4: SATA max UDMA/133 abar m8192@0xf2484000 port 0xf2484280 irq 23
[ 363.940706] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b00f80af300]
[ 364.191519] usb 1-7: new low speed USB device using ohci_hcd and address 2
[ 364.320049] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 364.304060] ata1.00: ATA-7: ST9160821AS, 3.BHE, max UDMA/100
[ 364.304063] ata1.00: 312581808 sectors, multi 16: LBA48
[ 364.304805] ata1.00: configured for UDMA/100
[ 364.417294] usb 1-7: configuration #1 chosen from 1 choice
[ 364.746679] usb 1-8: new full speed USB device using ohci_hcd and address 3
[ 364.954394] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 364.955513] ata2.00: ATA-7: ST9160821AS, 3.BHE, max UDMA/100
[ 364.955516] ata2.00: 312581808 sectors, multi 16: LBA48
[ 364.957362] ata2.00: configured for UDMA/100
[ 364.971486] usb 1-8: configuration #1 chosen from 1 choice
[ 364.980508] usbcore: registered new interface driver hiddev
[ 364.986569] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb1/1-7/1-7:1.0/input/input2
[ 365.018376] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-7
[ 365.030412] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb1/1-7/1-7:1.1/input/input3
[ 365.046302] input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-7
[ 365.046327] usbcore: registered new interface driver usbhid
[ 365.046331] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 365.294621] ata3: SATA link down (SStatus 0 SControl 300)
[ 365.614135] ata4: SATA link down (SStatus 0 SControl 300)
[ 365.614247] scsi 0:0:0:0: Direct-Access ATA ST9160821AS 3.BH PQ: 0 ANSI: 5
[ 365.614671] scsi 1:0:0:0: Direct-Access ATA ST9160821AS 3.BH PQ: 0 ANSI: 5
[ 365.616706] pata_amd 0000:00:09.0: version 0.3.10
[ 365.616750] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 365.617283] scsi4 : pata_amd
[ 365.617419] scsi5 : pata_amd
[ 365.618020] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[ 365.618023] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[ 365.949209] ata5.00: ATAPI: TSSTcorp CDDVDW TS-L632N, 0503, max MWDMA2
[ 366.152830] ata5.00: configured for MWDMA2
[ 366.152868] ata6: port disabled. ignoring.
[ 366.156353] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632N 0503 PQ: 0 ANSI: 5
[ 366.180516] Driver 'sd' needs updating - please use bus_type methods
[ 366.180601] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 366.180612] sd 0:0:0:0: [sda] Write Protect is off
[ 366.180614] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 366.180630] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 366.180673] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 366.180682] sd 0:0:0:0: [sda] Write Protect is off
[ 366.180684] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 366.180698] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 366.180702] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 366.222280] sda1 sda2 sda3
[ 366.237182] sd 0:0:0:0: [sda] Attached SCSI disk
[ 366.237244] sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
[ 366.237255] sd 1:0:0:0: [sdb] Write Protect is off
[ 366.237258] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 366.237273] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 366.237316] sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
[ 366.237334] sd 1:0:0:0: [sdb] Write Protect is off
[ 366.237336] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 366.237350] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 366.237354] sdb: sdb1 sdb2
[ 366.392737] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 366.397385] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 366.397405] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 366.397422] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 366.410454] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 366.410460] Uniform CD-ROM driver Revision: 3.20
[ 366.410516] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 366.909033] Attempting manual resume
[ 366.909037] swsusp: Resume From Partition 8:2
[ 366.909038] PM: Checking swsusp image.
[ 366.909180] PM: Resume from disk failed.
[ 366.942609] kjournald starting. Commit interval 5 seconds
[ 366.942620] EXT3-fs: mounted filesystem with ordered data mode.
[ 375.246958] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 375.383483] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 375.439705] shpchp: Unknown symbol acpi_run_oshp
[ 375.439768] shpchp: Unknown symbol pci_hp_change_slot_info
[ 375.439840] shpchp: Unknown symbol pci_hp_register
[ 375.440027] shpchp: Unknown symbol pci_hp_deregister
[ 375.440169] shpchp: Unknown symbol acpi_get_hp_params_from_firmware
[ 375.591274] input: Power Button (FF) as /devices/virtual/input/input5
[ 375.619034] ACPI: Power Button (FF) [PWRF]
[ 375.619118] input: Lid Switch as /devices/virtual/input/input6
[ 375.619462] ACPI: Lid Switch [LID]
[ 375.619536] input: Power Button (CM) as /devices/virtual/input/input7
[ 375.647648] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 375.650993] ACPI: Power Button (CM) [PWRB]
[ 375.651078] input: Sleep Button (CM) as /devices/virtual/input/input8
[ 375.682981] ACPI: Sleep Button (CM) [SLPB]
[ 375.759525] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
[ 375.759545] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000
[ 376.162894] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 376.162898] ricoh-mmc: Copyright(c) Philip Langdale
[ 376.162938] ricoh-mmc: Ricoh MMC controller found at 0000:07:05.2 [1180:0843] (rev 12)
[ 376.162948] ricoh-mmc: Controller is now disabled.
[ 376.178675] ACPI: Battery Slot [BAT0] (battery present)
[ 376.178798] ACPI: WMI-Acer: Mapper loaded
[ 376.206364] sdhci: Secure Digital Host Controller Interface driver
[ 376.206368] sdhci: Copyright(c) Pierre Ossman
[ 376.206415] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 22)
[ 376.206743] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7
[ 376.206754] ACPI: PCI Interrupt 0000:07:05.1[B] -> Link [LNK2] -> GSI 7 (level, low) -> IRQ 7
[ 376.206927] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 376.207010] mmc0: SDHCI at 0xf2100800 irq 7 DMA
[ 376.434819] ACPI: AC Adapter [ACAD] (on-line)
[ 376.452827] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 376.462657] ath_hal: module license 'Proprietary' taints kernel.
[ 376.474482] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 376.514451] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no)
[ 376.499531] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:25/LNXVIDEO:01/input/input10
[ 376.537848] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 376.611086] wlan: 0.9.4
[ 376.717677] ath_pci: 0.9.4
[ 376.718082] ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 16
[ 376.718092] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK1E] -> GSI 16 (level, low) -> IRQ 16
[ 376.718101] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 376.743770] wifi%d: unable to attach hardware: 'Hardware revision not supported' (HAL status 13)
[ 376.743791] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[ 376.822409] usbcore: registered new interface driver usbserial
[ 376.822430] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[ 376.822473] usbcore: registered new interface driver usbserial_generic
[ 376.822475] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial Driver core
[ 376.841907] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
[ 376.841947] option 1-8:1.0: GSM modem (1-port) converter detected
[ 376.842075] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB0
[ 376.842214] option 1-8:1.1: GSM modem (1-port) converter detected
[ 376.842292] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB1
[ 376.842300] usbcore: registered new interface driver option
[ 376.842302] /build/buildd/linux-2.6.24/drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
[ 377.125276] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
[ 377.125287] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LK4E] -> GSI 19 (level, low) -> IRQ 19
[ 377.125295] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 377.125498] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008
[ 377.235945] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000
[ 377.265526] Linux video capture interface: v2.00
[ 377.296089] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 377.353232] uvcvideo: Found UVC 1.00 device HP Webcam (0c45:62c0)
[ 377.377399] usbcore: registered new interface driver uvcvideo
[ 377.377405] USB Video Class driver (v0.1.0)
[ 377.576866] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 377.576878] ACPI: PCI Interrupt 0000:00:07.0[B] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 377.577204] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 379.367650] lp: driver loaded but no devices found
[ 379.504963] Adding 7341696k swap on /dev/sda2. Priority:-1 extents:1 across:7341696k
[ 380.035581] EXT3 FS on sda1, internal journal
[ 380.902711] kjournald starting. Commit interval 5 seconds
[ 380.886365] EXT3 FS on sda3, internal journal
[ 380.886371] EXT3-fs: mounted filesystem with ordered data mode.
[ 381.467610] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 382.185059] No dock devices found.
[ 382.549363] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.20.00)
[ 382.565868] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x11
[ 382.565873] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x12
[ 382.565875] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x13
[ 382.565877] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e
[ 383.600061] ppdev: user-space parallel port driver
[ 383.783229] audit(1219833557.592:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5378 profile="/usr/sbin/cupsd" namespace="default"
[ 384.956530] Clocksource tsc unstable (delta = -165617997 ns)
[ 385.120496] eth0: no link during initialization.
[ 385.169594] Bluetooth: Core ver 2.11
[ 385.170023] NET: Registered protocol family 31
[ 385.170028] Bluetooth: HCI device and connection manager initialized
[ 385.170032] Bluetooth: HCI socket layer initialized
[ 385.200757] Bluetooth: L2CAP ver 2.9
[ 385.200762] Bluetooth: L2CAP socket layer initialized
[ 385.219013] Bluetooth: RFCOMM socket layer initialized
[ 385.219031] Bluetooth: RFCOMM TTY layer initialized
[ 385.219033] Bluetooth: RFCOMM ver 1.8
[ 392.555915] NET: Registered protocol family 10
[ 392.556318] lo: Disabled Privacy Extensions
[ 392.556923] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 399.286142] CPU0 attaching NULL sched-domain.
[ 399.286150] CPU1 attaching NULL sched-domain.
[ 399.303817] CPU0 attaching sched-domain:
[ 399.303823] domain 0: span 03
[ 399.303825] groups: 01 02
[ 399.303828] domain 1: span 03
[ 399.303830] groups: 03
[ 399.303831] CPU1 attaching sched-domain:
[ 399.303833] domain 0: span 03
[ 399.303834] groups: 02 01
[ 399.303837] domain 1: span 03
[ 399.303838] groups: 03
|